Notated Dwg illustrating installation of Capacitor to implement a Low Pass Filter with -3dB point at about 1200Hz ->
DIFFERENCES BETWEEN CLASSIC AND 2
Classic MU output connector and pins are different
Classic MU has display but no chance for PE option
Classic MU does not have Trip/Alarm 1
Heads are compatible.
LKAT RESPONSE TIME INFO : See tech.bull section
MSDS for provided Sealant :
TRANSLATIONS
FRENCH : LKAT+ rev O 045671 - original english 043636 Rev Q
FRENCH : LKAT Sigma rev I 045705 - original english 044199 Rev J
MTBF (previously provided to Fuji) : Head=10yr (@40degC=7.5yr), MeteringUnit=15yr (@30degC=11.25yr), Infant mortality<0.75%
LKAT CABLE COSTS (Dec'15)
Power Standard (10 meter, molded) $ 46.98 each x 3 = Calc'd list price $141
Custom (10 meter, custom ) $ 75.70 each x 3 = Calc'd list price $227 ( Custom List would be $86 more for same length )
Base Material $20.30 each
Labor and Overhead $40.00 each * ($2.72 - $94.85)
Cable $ 0.47 per foot / $1.54 per meter
Output Standard (30 meter, not molded) $192.32 each x 3 = Calc'd list price $577
Custom (30 meter, custom) $164.10 each x 3 = Calc'd list price $492 so average is $525
Base Material $ 20.61 each
Labor and Overhead $ 46.00 each * ($26.89 - $95.56)
Cable $ 0.99 per foot / $3.25 per meter
Head Standard (10 meter, molded) $165.72 per pair = Calc'd list price $497
Custom (10 meter, custom) $205.22 per pair = Calc'd list price $616 ( Custom List would be $119 more for same length )
Base Material $ 55.22 per pair
Labor and Overhead $106.00 per pair * ($98.63 - $114.93)
Cable $ 1.34 per foot of pair / $4.40 per meter of pair ( 2 x $0.668 per foot)
LKAT+ CABLE INFORMATION ( same for LKAT2 )
Power 0.38" (9.6mm) 40mm min bend radius No shield in cable
Head 0.4.05" (10.3mm) 100mm min bend radius Shielded with connection to +/- 15V common in head
Output 0.500" (12.7mm) 85mm min bend radius Shielded with possible connection on raw cable end ( no connection at connector )
LKAT HEAD EXTENSION CABLES
46034 10m head half A extension cable with Connectors on both ends
46035 10m head half B extension cable with Connectors on both ends
$525 list price each. Less your 16% discount
CONNECTORS used on cable assemblies that connect to the LKAT metering unit:
Reference the attached PDF for details.
Power : ConX all CXC-3106A-18-12S-300
Output : ConX all CXC-3106A-20-29P-300
Head ( 10m standard length molded ) : ConX all CXC-3106A-20-16S-300
Head ( custom length non-molded ) : ConX all CXS-3106A-20-16S-300
Highlighted to show specific connectors
20mA OUTPUT DETAILS
If the loop only has a burden of 1V, then the LKAT current loop output can reach 27mA
... if calibrated for 0...20mA this means approximately 135% of full scale
... if calibrated for 4...20mA this means approximately 143% of full scale
If the look has a burden of 10V, then the LKAT current loop output can only reach 22mA.
... if calibrated for 0...20mA this means approximately 110% of full scale
... if calibrated for 4...20mA this means approximately 112% of full scale